FAQ ¢x Sitmap¢x Contact¢x About ¡@
 
 
¡@
     
     

Description

¡@

Features

• ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant for Annex A, B
• ITU-T G.992.3, G.992.4 for ADSL2
• ITU-T G.992.5 for ADSL2+
• Downstream and upstream data rates up to 24Mbps and 1Mbps
• Configuration and management operated via WWW browser with password protected access
• Firmware upgrade via FTP
• All Ethernet ports support Auto-Crossover (MDI/MDI-X), no need for crossover cables
• Compliant with IEEE 802.3 and IEEE 802.3u 10/100 Mbps
• Share your ADSL2+ Internet access on your Ethernet Networks
• DMZ and Virtual Server function provided operating modes include routing, bridge, static IP, PPPoE, PPPoA etc

Specifications

ADSL Features Supports DMT modulation and demodulation
Support ITU-T G.992.1 G.992.3, G.992.4, G.992.5 Annex A & T1.413 Issue 2 for Annex A, B
ETSI TS 101 388 / DTS TM-06006 (optional)
Supports ITU-T G.992.1 (G.dmt) Annex B ¡V Deutsch Telecom / U-R2 (optional)
G.992.1 (G.dmt): Downstream and upstream data rates up to 8Mbps and 1Mbps
G.992.2 (G.Lite): Downstream and upstream data rates up to 1.5Mbps and 512Kbps
G.992.3 / G.992.4 (ADSL2) / G.992.5 (ADSL2+) downstream and upstream data rates up to 24Mbps and 1Mbps
ATM Features WAN Mode Support: PPP over ATM (RFC2364) and PPP over Ethernet (RFC2516)
LAN Mode Support: Routed / Bridge Ethernet Over ATM (RFC-2684)
Classical Internet Protocol Over ATM (RFC-1577)
CBR / UBR / UBR with PCR Shaping / VBR-rt / VBR-nrt
Management Features Firmware upgrade via FTP
Customize Web pages
WAN and LAN side connection statistics
Configuration of static routes and routing table
Configuration of NAT / NAPT
Password protected access
Selection of Bridge or Router Mode
PPP user ID and password
Configuration of VCs (Virtual Circuits)
Physical Interfaces ADSL Modem / Router with four RJ-45 (10/100BaseT) Ethernet port & an ADSL port
ADSL Status and switching hub LED indicators
Bridge Mode Ethernet to ADSL self-learning Transparent Bridging (IEEE802.1D)
Router Features DHCP Server and Client
NAPT (Network Address and Port Translation)
NAT (Network Address Translation)
ICMP (Internet Control Message Protocol)
DDNS (Dynamic Domain Name Service)
UPnP (Universal Plug and Play)
Security Features Password protected configuration access
User authentication (PAP / CHAP) with PPP
Ethernet Interface
 Compliant with IEEE802.3 and 802.3u 10/100Mbps
All Ethernet ports support auto-crossover (MDI/MDI-X)
Certification FCC Part 15 Class B & Part 68
CE Mark, EN 55022¡FEN 55024¡FEN 50081-1



  Copyright © 2005 JAHT Technologies Corp. All Rights Reserved