JWP-9001BM 11Mbps Outdoor Bridge links two or more separate networks
(typically located in different buildings) to create a single expanded
LAN quickly, simply, and economically. It delivers higher transmission
rates than an E1 or T1 line, and eliminates the inconvenience of
installing an expensive leased line or fiber-optic cable.
The JWP-9001BM fully complies with the IEEE 802.11b standard. Combining
superior wireless technology and advanced features, the JWP-9001BM
Outdoor Bridge is a reliable, high-performance, cost-effective solution
for the most demanding wireless networking environments.
The JWP-9001BM is a wireless bridge capable to
link two or more remote sites together with up to 11Mbps data rate.
When constructing a wireless building-to-building link with directional
antennas, it is necessary to align the antennas for proper operation.
The intelligent antenna alignment feature of JWP-9001BM helps engineers
to get the quick, convenient, and accurate alignment.
IEEE 802.11b Compliant
with the IEEE 802.11b wireless standard, ensuring full interoperability
with other 802.11b-compliant products.
Superior Coverage and High Signal Quality
Our advanced radio-frequency technology provides outstanding performance
at data rates up to 11 Mbps and distances up to 30 km (18 miles).
(Maximum distance depends on choice of antenna.)
Superior receiver sensitivity enhances pickup
of weak data signals over greater distances.
Rugged design proven in outdoor installations
in locations affected by wind, rain, and snow.
Allows administrators to manage the bridge from anywhere on
the network. All that is required is that the bridge be on the
same logical IP subnet as the management station.
Comprehensive Network Management
Full-featured Windows-based SNMP software included
- the Management System (WMS)
Robust discovery mechanism:
Auto IP address
assignment - the JWP-9001BM will automatically assign itself
a new IP address should the DHCP server fail.
Protocol filtering: saves bandwidth and increases
security by preventing the bridge from transmitting specified
protocols from the wired Ethernet LAN into the wireless zone.
On-line firmware upgradability: allows the bridge's
firmware to be upgraded via WMS from a remote station without
stopping the network.
Trap server: with auto-notification, network
administrators can easily monitor operating conditions and take
preventive action to ensure maximum network uptime.
DHCP client support: automatically obtains a
new IP address from a DHCP server.
Bulk configuration: automatically propagates
configuration settings to multiple bridges on the same subnet.
Bridge discovery - allows quick location of all JWP-9001BM
bridges for centralized management.
WEP (Wired Equivalent Privacy): 64- and 128-bit
WEP encryption for secure wireless LAN data transmissions.
SNMP access control: SNMP authentication prevents
unauthorized tampering with bridge settings.
Antenna Alignment Monitoring
When using directional antennas for bridge-to-bridge links,
manual alignment of the antennas for proper operation is a must.
The JWP-9001BM performs intelligent antenna alignment monitoring
for quick, convenient, and accurate alignment.
The detachable antenna design allows such options as
connecting a high-gain antenna for better signal quality over
a wider coverage area at distances up to 30 km (18 miles) or
in a radio-frequency-hostile environment.
Outdoor Protection Solution for Harsh
The Outdoor Protection Package allows the bridge to
be located outdoors, where it may be subjected to wind, rain,
Power Over Ethernet
PoE reduces power-cable installation expenses and increases
location options by carrying both data and power to the bridge
through a single Ethernet cable.
||Direct Sequence Spread Spectrum (DSSS)
||2.4 - 2.484GHz
||BPSK, QPSK, CCK
||One 10Base-TX (RJ-45)
||One Reverse N-type Male
|| 100 mW (max.)
||11, 5.5, 2, and 1Mbps, with auto fallback
||within ¡Ó25 ppm
|| -83 dBm
||Bridge: Point-to-Point, Point-to-MultiPoint
||64/128-bit WEP encryption
||SNMP-based network management tools for Microsoft
Windows included; features include MIB I and MIB II support,
bridge discovery, protocol filtering, trap management, firmware
||-20¢X to 70¢XC
|| -30¢X to 80¢XC
|| 5% to 95%, non-condensing
||165 ¡Ñ 135 ¡Ñ 55mm (6.52 ¡Ñ 5.34 ¡Ñ 2.17in.)
||Input voltage 12V DC; external power supply
included (input voltage 100V to 240V AC)
||Windows-based Wireless Management System.
Windows 98, Me, NT 4.0 (SP4 or above), 2000, XP.
||Up to 30 km (18 miles) at 11 Mbps with optional