| |
| ¡@ |
|
| |
|
|
| |
|
|
 |
 |
|
|
| Description
|
| JAHT WAM-7300P2 is a wireless 11n ADSL modem router. It complies with ADSL2/2+ standards for worldwide deployments and supports maximum downstream rates of 24Mbps and upstream rates of 2Mbps. The unit also complies with IEEE 802.11n, draft 2.0 and MIMO technology that supports the maximum wireless speed of 300Mbps. Integrated 4-port 10/100Mbps switch allows you to connect 4 network devices. Advanced firewall features are included to protect your network from being attack from the Internet.
Improving
performance of wireless link!
¡@ |
| Features |
• Compatible with all leading DSLAMs
• Complaint with IEEE 802.11b/g and 802.11n draft 2.0, 2.4GHz standard up to 300Mbps
• Complaint with IEEE 802.3, IEEE 802.3u 10/100Mbps, auto-negotiation
• Supports PPPOA, PPPOE, Classical IPOA, multi-protocol over AAL5
• Selection of bridge or router mode
• NAT/NAPT, DHCP client/server, static/dynamic routing, DMZ, virtual server, PAP/CHAP
• Advanced firewall features
• Web-based management and firmware upgrade
|
| Specifications |
ADSL2/2+
|
ANSI T1.413 Issue 2, ITU-T G.992.1(G.dmt) and G.992.2 (G.lite) compliant for Annex A, B, ITU-T G.992.3, G.992.4 for ADSL2 and ITU-T G.992.5 for ADSL2+ |
ATM
|
- WAN Mode Support : PPP Over ATM (RFC2364) and PPP Over Ethernet (RFC2516)
- LAN Mode Support : Routed / Bridge Ethernet Over ATM (RFC-2684)
- Classical Internet Protocol Over ATM (RFC-1577)
- CBR / UBR / UBR with PCR Shaping / VBR-rt / VBR-nrt- Supports 8 ATM VCs
|
| Router |
- DHCP Server and Client
- NAPT (Network Address and Port Translation)
- NAT (Network Address Translation)
- ICMP (Internet Control Message Protocol)- DDNS (Dynamic Domain Name Service)
|
Wireless
|
- IEEE 802.11g/b and 802.11n draft 2.0 Access Point
- 2Tx/3Rx transmit and receive?
- 64/128-Bit WEP encryption, WPA-PSK, WPA2
- Data rate up to 300Mbps
- Transmit Power: 16dBm, typical- Receive Sensitivity: -72dBm, typical
|
| Management |
- Web interface
- Firmware upgrade via web interface
- WAN and LAN side connection statistics
- Configuration of static routes and routing table
- Configuration of NAT / NAPT
- Selection of Bridge or Router Mode
- PPP user ID and password- Configuration of VCs (Virtual Circuits)
|
Security
|
- Built-in Firewall
- Access Control
- Packet filtering
- Password protection for management
- User authentication (PAP / CHAP) with PPP- Wireless encryption protection
|
WAN
|
1 RJ-11 port ADSL WAN connection |
LAN
|
- 4 RJ-45 ports with auto-crossover (MDI/MDI-X)
- Compliant with IEEE802.3 and 802.3u 10/100Mbps
- Wireless RF
|
| Antenna |
3 fixed 2dbi antennas or
3 detachable 5dbi antennas (optional)
|
| Power |
9V DC, 1.5A |
| Environment |
- Temperature: 0¢J -55 ¢J
- Humidity: 10% - 90%, non-condensing
|
| Certifications |
CE, FCC |
|
|
